The Song Arms Of The Angel By Sarah Mclachlan - 1367 Words

The song Arms of the Angel by Sarah McLachlan is an emotional song that many can relate to. It is about the loss of someone close that has endured pain and will, hopefully, find comfort and peace â€Å"in the arms of an angel†. Pairing this song with animal cruelty would release a surge of emotions in the audience, which is exactly what the creators of the ASPCA commercial were targeting. ASPCA (The American Society for the Prevention of Cruelty to Animals) is a non-profit organization set to receive monthly donations in order to save the lives of innocent animals being abused and neglected. The commercial is trying to persuade animal lovers and pet owners, which is approximately 62% of households in America, to donate to the ASPCA and to provide effective means to prevent animal cruelty. The commercial appeals to the ethical, emotional, and logical senses of the audience with their choice of speaker, the visuals, song, and word choice used, and the reasoning and statistics in the commercial to persuade the viewers to donate and to expose the evils of animal cruelty. One way the ASPCA commercial strives to persuade its audience is through its employment of Grammy Award winning artist, Sarah McLachlan, as its spokesperson. 53 seconds into the commercial, Sarah McLachlan is shown sitting on a couch petting a yellow lab, with the caption on the bottom of the screen reading â€Å"ASPCA Supporter†. This particular instance of the commercial uses a very strong sense of ethos because of howShow MoreRelatedAnalysis Of Sarah Mclachlan Animal Cruelty Video By BC SPCA812 Words   |  4 PagesIn the Arms of the Angels If you have seen the commercial â€Å"Sarah McLachlan Animal Cruelty Video† by BC SPCA you will know that it is filled with information and emotions. More specifically, Sarah McLachlan expresses that if we donate just a little bit of money we will help those animals in need. McLachlan says â€Å"Will you be an angel for a helpless animal.† (BC SPCA) In this part of the video, Sarah McLachlan is suggesting that if we donate we will help animals who have been beaten, starved, abusedRead MoreAnimal Cruelty : The American Society For The Prevention Of Cruelty1627 Words   |  7 Pagesâ€Å"In the arms of the angel, Fly away from here, From this dark cold hotel room and the endlessness that you fear† (McLachlan, 1998). These words are instantly remembered by many people from the 2007 ASPCA commercial. This song is known for being associated with sad and heartbreaking events, and paring it with animal cruelty would release a surge of emotions in the audience, which i s exactly what the creators of the ASPCA commercials were targeting. ASPCA (The American Society for the Prevention ofRead MoreThe Arms Of An Angel1500 Words   |  6 PagesIn the Arms of ASPCA When someone hears the song â€Å"In the Arms of an Angel† by Sarah MacLauchlan, the first thing that comes to mind is the ASPCA (American Society for the Prevention of Animal Cruelty) commercial. The commercial is produced by ASPCA, a non-profit organization, in attempt to receive monthly donations in order to save and prevent innocent animals from being abused and neglected. With the help of this commercial, the producers try to reach out to those generous enough to donate moneyRead MoreThe Effectiveness of ASPCAs Commercial Essay757 Words   |  4 Pagesreactions of the commercial’s viewers. For those who have never seen the video it has a very sad and morose tone to it. The commercial begins with showing pictures and videos of suffering animals with the song â€Å"Angel† playing in the background. While this is going on the narrator of the commercial (Sarah McLachlen) is softly talking about the suffering and abuse that these unfortunate animals go through. Through many different rhetorical techniques the viewers are many times brought to tears after watchingRead MoreCritical Analysis Essay : Animal Cruelty1785 Words   |  8 Pagesminimize it. Sarah McLachlan has made commercials in regards to animal cruelty. They all consist of videos of abused animals, some without eyes and/or limbs. In the background, they play a song by Sarah McLachlan called â€Å"Angel†. In the song the line â€Å"In the arms of the angel, Fly away from here From this dark, cold hotel room† (McLachlan 1997). The meaning behind the song is to put one into the shoes of an abused animal and projects the feelings that these animals feel on a day to day basis. Sarah representsRead More The language paper1204 Words   |  5 Pagesit and not even stopping to look closely at any pictures, but then I get to this one and I found myself just staring at it and looking for something that might not even be there. When I first glanced at it I just saw a person wearing black and their arm with her head not captured in the picture. When I looked at it again I saw myself in the background with a look of distress and sadness incorporated with the look of reality finally setting in. I think the reason that I didn’t quite look at myself in

Endothermic Reaction Examples

Heres a list of examples of endothermic reactions. You can use these when asked to cite an example or to get ideas to set up a demonstration of an endothermic reaction or process. Endothermic Reaction Definition An endothermic reaction is any chemical reaction that absorbs heat from its environment. The absorbed energy provides the activation energy for the reaction to occur. A hallmark of this type of reaction is that it feels cold. Endothermic Chemical Reactions A good example of an endothermic reaction includes dissolving a salt. It doesnt have to be table salt, nor does the solvent need to be water. The reaction of barium hydroxide octahydrate crystals with dry ammonium chlorideDissolving ammonium chloride in waterThe reaction of thionyl chloride (SOCl2) with cobalt(II) sulfate heptahydrateMixing water and ammonium nitrateMixing water with potassium chlorideReacting ethanoic acid with sodium carbonatePhotosynthesis (chlorophyll is used to react carbon dioxide plus water plus energy to make glucose and oxygen) Endothermic Processes These examples could be written as chemical reactions, but are more generally considered to be endothermic or heat-absorbing processes: Melting ice cubesMelting solid saltsEvaporating liquid waterConverting frost to water vapor (melting, boiling, and evaporation, in general, are endothermic processesMaking an anhydrous salt from a hydrateForming a cation from an atom in the gas phaseSplitting a gas moleculeSeparating ion pairsCooking an eggBaking bread Endothermic and Endergonic An endothermic reaction is a type of endergonic reaction. However, not all endergonic reactions are endothermic. Endothermic reactions involve heat absorption. Other forms of energy which might be absorbed in an endergonic reaction include sound and light.

A Personal Experience With Mexican American Culture

A Personal Experience With Mexican American Culture This is a narrative of one Mexican American woman’s experiences and her views on the importance of passing down the cultural beliefs of her ancestors. In the section of the country in which I live there is a large population within the community of Mexican American culture. Although I have frequent contact with people of Mexican American heritage either through employment or interaction out in the community, I have a limited understanding of their culture. For this reason, I chose to learn more about the population of people I have frequent contact with and as a professional work with as clients in the field of mental health counseling. The quest of finding someone knowledgeable to discuss the population, their cultural background and some of their necessities, as well as some past experiences, led me towards contacting a church. This took calling two different churches before the person at the second church informed me that I needed to speak with, Mrs. Socorro Garcia head of their Hispanic Ministries. Unfortunately, Mrs. Garcia was on vacation when I called, but I was able to speak with her over the phone the following week, setting up an interview in person at her office a couple days later. This was a relief because I was becoming concerned about locating someone for a personal interview. Primary Cultural Values Mrs. Garcia is a middle age Mexican American woman, first generation acculturation into the societal beliefsShow MoreRelatedTaco Us How Mexican Food Became More American Than Apple Pie1384 Words   |  6 Pages2016 â€Å"Taco USA†: Gustavo Arellano’s Response to a Tater Tot Burrito â€Å"Taco USA: How Mexican Food Became More American Than Apple Pie† was written in 2012 by Gustavo Arellano, a prolific food author for the Orange County newspaper OC Weekly. This article originally appeared as an online publication in Reason Magazine. Arellano has written books about Mexican food and its role in the American experience. His writings explain how this genre of cuisine has evolved and transformed as it has spreadRead MoreA Narrative Of One Mexican American Woman1663 Words   |  7 PagesIntroduction: This is a narrative of one Mexican American woman’s experiences and her views on the importance of passing down the cultural beliefs of her ancestors. In the section of the country in which I live there is a large population within the community of Mexican American culture. Although I have frequent contact with people of Mexican American heritage either through employment or interaction out in the community, I have a limited understanding of their culture. For this reason, I chose to learnRead MoreEssay Blacks and Latinos in America1026 Words   |  5 PagesAmerica   Ã‚  Ã‚  Ã‚  Ã‚  Through our readings of the Mexicans in the U.S. and the African-American experience modules, we begin to understand the formation of identity through the hardships minorities faced from discrimination. In this paper, I am going to compare and contrast the ideas of identity shown through the readings. These two modules exemplify the theme of identity. We see how Blacks and Latinos tried to find their identity both personally and as a culture through the forced lifestyles they had toRead MoreMexican American And Mexican Americans Essay1126 Words   |  5 PagesUnited states are Mexicans (Gonzales-Barrera Lopez, 2013). Mexican American’s are considered minorities in the United States. There are many reason why I am choosing to explore Mexican Americans for this paper. As a minority myself, I can relate to some of the struggles that Mexican American’s may face. However, there are some things that I will never relate to or know the personal aspect of t he Mexican culture. Just like any other population, Mexican Americans have their own culture, values, and challengesRead MoreMexican American Culture1658 Words   |  7 PagesEvery culture has their own unique and distinguishing characteristics. One’s cultural identity defines who they are as an individual, group, and community. Their cultural identity may be reflected in numerous ways such as: language, communication styles, religion, beliefs, values, clothing, or other types of aesthetic markers. Cultural identity is formed by many of these traits but is not limited to these specifically. This essay will provide detailed information on Mexican Americans, and theirRead MoreHomeland1082 Words   |  5 PagesCaught Between Cultures Gloria Anzaldà ºa’s The Homeland, Aztlà ¡n / El Otro Mà ©xico, explores the political and social impact of creating borders between places and their residents. Through use of her unique and diverse writing style, Anzaldà ºa is able to capture the struggle faced by displaced Mexicans and their posterity. Not only is she able to accurately portray their hardships, but she is also able to alienate her white audience by using both English and Spanish. This is done in a way that providesRead MoreMexican Culture : The Sound Of The Drums1275 Words   |  6 Pages The Sound of Culture Boom-bara- boom-boom- bara-boom-boom- bara-boom-boom-click-click. The sound of the drums is incredible, what captures everyone s attention is the sense you have when you hear the rhythm and beat of any song. Music is a big part of my life and my culture. Mexican American culture demonstrates that I am someone who was born in Mexico but lives in America. I had no clue of my culture until I was about 10 years old. When I was growing up I always thought that I was born here butRead MoreMexican Americans: Perspectives on Death and Dying Essay1114 Words   |  5 PagesMexican Americans: Death and Dying Hispanics are the fastest growing minority in the United States, and the majority of them are Mexican in origin (Kemp, 2001). The Roman Catholic Church plays a vital role in the culture and daily life of many Mexican Americans. Consequently, healthcare personnel must become culturally competent in dealing with the different beliefs possessed by these individuals. Nurses must have the knowledge and skills necessary to deliver care that is congruent with the patient’sRead MoreCultural Norms: Mexican-American Culture1445 Words   |  6 PagesCultural norms: Mexican-American culture Customary practices within the culture Mexican-American culture has been characterized as a family-focused, community-oriented culture. Even second and third-generation Mexican-Americans place a higher value upon their relationships with others versus personal autonomy, in contrast with the dominant values of the United States. Living in extended family situations, or being influenced by extended family is much more common in Mexican culture than in otherRead MoreMexican American Stereotypes1571 Words   |  7 PagesMexican-Americans are an essential part of the United States’ diverse mix of cultures. Although a prominent part of American culture, they are often repressed into stereotypes in literature. More often than not characteristics delegated to Mexican-Americans have negative connotations: poor, violent, alien, etc. This stems from years of tension between Mexico and America, whose relationship seems to be a never-ending cycle of highs and lows. Cultural critics recognize these problems and work towards

A comparison of Fluvial and Glacial Sediments (deposits) In the Glen Rosa area of Arran Free Essays

string(92) " 987 382 The slip off slope – 987 383 I will record my results on the attached sheet\." The aim of my investigation is to ‘compare the Fluvial and Glacial sediments in the Glen Rosa area’. I will use a variety of experiments and methods to collect my results. My investigation will be based on proving these hypotheses are correct. We will write a custom essay sample on A comparison of Fluvial and Glacial Sediments (deposits) In the Glen Rosa area of Arran or any similar topic only for you Order Now I hope to show that: * Fluvial sediment will be generally smaller than glacial sediment. * Fluvial sediment will be more rounded than glacial sediment. To provide evidence of these hypotheses I will look at river sediment on the fluvial slip off slope and compare it with that of a glacial deposit in the form of a terminal moraine. Slip off slope; The slip off slope Terminal moraine; I will also be considering; The difference in B Axis length, Roundness, Sediment composition and Sorting. I expect the glacial deposits to be more angular than that of the fluvial deposits because the rate of erosion is different. In fluvial erosion the rocks are in constant erosion from frequently colliding (attrition) with other rock material. I would expect more edges of the rock to be rounded because the chances are they would have been knocked off. The glaciated deposits however, I would expect to be more angular because they collide less. I am going to collect a range of results which will hopefully provide evidence that my theories are correct. To collect these results I will: * Use appropriate methods to measure and accurately record my results to prove my hypothesis correct. I will measure the length of a slip off slope (and moraine vertically if possible). The length divided by twenty, will be the length of the intervals for my measurements. At each interval I will proceed to measure these factors. I. Roundness II. Orientation III. Length of the B axis. (stone width) By doing this I will collect sufficient evidence to support or disprove my hypothesis from the results. I am going to use twenty readings to give me an accurate sample of the whole geographical feature. Points to note: Glen Rosa is a NTS area – conservation issues do not allow us to move scenery – including rocks. This could be a limiting factor as we may not be able to locate all the results we need. And to what extent do we measure sediment? After all a grain of dirt is a form of sediment, but is it practical to measure a grain of dirt? My project also involves considering how glacial and fluvial deposits vary in: * Sorting (division into coarse, medium and fine sizes). * And the orientation of the B axis. * And composition ( rock type ) The orientation is the alignment of the B axis. River deposits are measured on a slip off slope and glacial deposits in a terminal moraine, with the following expectations: * Water borne sediment will be sorted into size categories, the largest material being dumped upstream first, (upstream where the water flow is strongest) and the finest last (downstream where the flow is weakest). Glacial deposits however will be dumped irregularly because they ‘melt out’ of the ice. * River sediment will have been rounded by river transport and attrition whereas glacial sediment, having only travelled a sort distance, will be angular. And slip off slope deposits will lie with their B axis at right angles to the flow of the river whereas glacial deposits are thought to lie in the ice with their A axis parallel to the direction of flow. Risk assessment. The axis of a rock are as follows: The A axis (Length of rock) The B axis (Width of rock) The C axis (Depth of the rock) Apparatus needed for my investigation: * Callipers * Compass clinometer * A water-proof notebook/pad * A pencil * Hand lens * Sorting chart * Powers Roundness index * Measuring tape – 20m length * Camera (to record locations and to provide secondary evidence) * Map to find location and note grid references Note Because I was working in a group and am collecting data for the group it is imperative that each of us has their own role and each must keep to that role. This is because the sake of a fair test. For example, If I read the callipers at the start I must read them throughout because the others eyesight and judgment may not be the same as mine, so if each person continues to do one job their judgment will not be too diverse. I am going to collect my evidence to prove my theory by doing thus: I. Firstly I am going to assess the possible location of a moraine and a slip off slope. II. Secondly I am going to travel to the Glen Rosa valley area. III. Then I will proceed to go to the site and take photographs. IV. I will measure the article in question by using a transect of the slip off slope/ terminal moraine. V. Then I will collect the evidence I need by accurately measuring and recording my results. I shall be looking at the ; a. Roundness b. Orientation c. Length of the B axis. I will measure the transect by measuring a point across the hole moraine / slip off slope and divide it by 20.The results from that then apply to the collecting of the samples, at each interval one should proceed to measure the nearest sample. I will measure Roundness by- comparing sediment sample to the guide shown below, this may be difficult to decide which category the rock goes into however for the sake of speed it was my primary choice. I will measure orientation by – locating the b axis and using the compass clinometer I will measure the orientation. I will measure the length of the B axis by – using callipers and reading off the rule. I will collect 10 (20 if possible) readings from each site to give me a suitable range of results. The locations I have chosen are highlighted on the map and the grid references are below: The terminal moraine – 987 382 The slip off slope – 987 383 I will record my results on the attached sheet. I will present my evidence as a range of graphs with attached section on collecting recording and presenting evidence. Stage 2 collecting, recording and presenting evidence. On the Day when we travelled to these two grid references the terminal moraine on 987 382 and the slip off slope on 987 383, I worked with 2 other people to obtain evidence/results for my investigation, they were Matthew Cruse and Lawrence Card. This was the original plan for the results table we were going to use. However during collecting the evidence our group decided we could double the amount of our results in ample time. So this is the real results table we developed. We were helped by 1 person in identifying some of the rocks, she was called Lucy and she was an instructor for this course. On the actual day we collected 20 samples from each site both the terminal moraine and the slip off slope. Our results table is as below; Graph sheet 1 Some graphs may help to show the evidence. Firstly the length of the b axis against the length of the slip off slope. (Sample every 1 meter). Anomalous point Graph sheet 2 These are the results for the composition of both fluvial and glacial deposits. Here O represents other specimen of rock P is Phyllite and G is granite Fluvial deposits Glacial deposits As it is clear here the fluvial deposits have more variation that that of the glacial deposits, the glacial deposits contain no other rock types. Graph sheet 3 Charts to compare roundness of fluvial deposits against the roundness of glacial deposits. It is clear here that glacial deposits are more randomised and do not follow any particular roundness, where as the fluvial deposits are mostly in-between the 2-3 category Graph sheet 4. Here are 2 charts to compare the orientation of the B axis. Fluvial orientation Glacial orientation Both graphs show completely opposite finding which was totally as I had expected, mainly the glacial deposits were all at right angles to the flow of direct which is what happens. The fluvial was parallel to the flow of water. The glacial sediments B axis was not parallel to the flow of the glacier because it travels on it’s A axis which is as I predicted. Stage 3 description, analysis and interpretation of evidence. All of my data I collected I believe I collected accurately. But unfortunately my results do not support my predictions very accurately which were; * Fluvial sediment will be generally smaller than glacial sediment. * Fluvial sediment will be more rounded than glacial sediment. The graphs which show sorting on the B axis for the fluvial sediment are vast variations than those predicted although they do provide weak evidence (graph sheet 1). For example, on the photograph below it is clear that there is sorting on the slip off slope. This sorting is the absolute opposite to what I had expected in my prediction. This variation may exist because it is a frequently visited spot and people very often pick up rocks to study them and cast them down in a different locations, this may have happened here. Or another reason could be my inaccurate measurements, or even the choice of my samples. Section 4 drawing and justifying conclusion and evaluation. Here were my main predictions * Fluvial sediment will be generally smaller than glacial sediment. * Fluvial sediment will be more rounded than glacial sediment. Here are the sub predictions * Sorting (division into coarse, medium and fine sizes). * And the orientation of the B axis. * And composition ( rock type ) As far as the sorting for the slip off slope is concerned, I found that my results are conclusive but very weakly so. The results did support my prediction roughly but not the extent I had hoped for. You can see evidence for this though section 3. Because I found that the slip off slope is not how I expected I have used additional secondary evidence to show what my results should have been like according to my prediction and the laws of fluvial deposition. There is only one reason I can see for my weak results for the slip off slope – human interference, it is easy to pick up something and place it down somewhere else, could that of happened here? Since it is a widely used site I believe this is the case. I believe that the evidence for the sorting I obtained from the fluvial sample appeared to be back to front the larger sediment should have been deposited at the front not the back. The composition is definitely as I had expected. So as far as the composition is concerned I found a definite conclusion that my sub-predictions were true, the fluvial deposits covered a wider range of rock type because it could transport more diverse material than the glacier. Although there is little evidence to support this there is a definite link. The orientation was not as I had of expected. I believed the glacier to be more randomised where as the fluvial to be more sorted. Evaluation We had a few problems during this investigation many of them minor, but a few were major. For example, since we did not have any artificial light and light throughout the day was fading we may have made a few mistakes on measurements, this may be a reason for some if not all of the anomalous points. One person in my group noted all of the data down on the day so we could have misjudged his handwriting and could have written variable data. Below is a simple diagram of some of our problems: The Main weaknesses and faults. The main weaknesses during my investigation were the lack of conclusive results as shown in the graphs. However this could be rectified by using secondary data, such as maps, other people’s results as shown during my project shown after this page. As always any investigation can be improved by the quantity of evidence, and also the quantity. If I could obtain more evidence from different locations, i.e. not just from Glen Rosa it would provide a much better supporting structure for my predictions. Although this would involve thousands of pounds it would have a very accurate conclusion. How to cite A comparison of Fluvial and Glacial Sediments (deposits) In the Glen Rosa area of Arran, Papers

Business Models Sustainable Technologies

Question: Discuss about the Business Models for Sustainable Technologies. Answer: Introduction The work nature has been changing drastically in this current world. The assimilation of the world class technologies and innovations have brought the effective changes in the automotive industries (Palin et al. 2012). The study will thus be focusing on the changes in the work nature during the manufacturing process of Tesla Motors Model S. The video clip presents the sequential steps that are used in the factories during the manufacturing process of the cars. Recognising the changes in the work process, the future required changes will be predicted accordingly. The description of the employment condition will be determined. After identifying such functionalities, the required adaptation for the future workforces will be discussed in this study. Changing Nature of the Work The identification of this manufacturing process, it is noted that there are many of the changes in the workplace have been undertaken by the manufacturing team of Tesla. This section of the study will be identifying the changes associated with the manufacturing process Changes in the Manual Transfers Recognising the manufacturing process in the factory of Tesla motors, it is noted that previously, the manufacturing process was undertaken by depending on the workers. The manual transferring of the technologies and machineries during the manufacturing process was found in the initial stage. However, eventually, the process has transformed drastically by the implementation of the structured technologies. The materials are now transferred through the technologies and assemble together to manufacture the cars. Assimilation of the Process At the initial stage, the manufacturing process was divided into different steps. In this current time, such sequential steps are transformed. If concentrated on the current manufacturing process, it can be seen that the different steps are collaged and brought together to save the time of manufacturing cars (Chen and Perez 2015). The technologies are brought together to form the major engine, which will be put into the vehicle. Centralised Location In this current manufacturing procedure, it has been noted that the manufacturing team has brought the models together in the centralised location. The ruling body centre is associated with the stamping panels for putting the models together. The manufacturing process starts from manufacturing the floor of the car and then moves to the body sides. Self Piercing Rivets In the previous work procedure, the welders used to pierce the machineries whenever it was required. However, in this current manufacturing process, it is noticed that the factory has the self-piercing rivets (Goodrick 2014). It decreases the accidental risks of the associated workforce. There is the cold metal transfer conventional resistance welding system that is minimising the risks. Necessary Changes If the company would be able to accept such changes, in next 5-10 years, the company will be able to strengthen the competitive position by bringing more innovations in the automotive industry. The company may even manufacture the self-driven cars and associate more innovative technologies that will be beneficial enough in acquiring profitability. It will in fact increase the productivity and determine the strengthened reputation of the company. The company will be able to strengthen the brand identity as well. Implications for work conditions After identifying the associated manufacturing process, some of the predications can be made for the future prospects. It has been identified that the company has been implementing new technologies for assembling the model and manufacturing the vehicles (Spencer 2016). However, it can be predicted that if the associated workers will receive the proper training session for using such technologies, it will minimise the risk factors. It has been noticed that in the manufacturing factories, there is the accidental risks since the workers have to work with the heavy technologies associated with the manufacturing process. Hence, it is necessary for them to maintain the proper cautions while using such technologies. Hence, the proper training session is necessary for each of the workers. Further Adoption of Changes After recognising the adopted changes within the manufacturing factory, the company requires focusing on several adoptions that will be beneficial for the associated workers. These adoptions are discussed further: Job Satisfaction The associated workers are involved with the manufacturing process that includes much risky environment. It is necessary for the company to pay attention on the safer work environment that can bring the security among the associated workers. The company requires paying attention to the health safety and security purposes, which are beneficial enough in bringing the job satisfaction among the employees (Liu et al. 2014). Motivation Workplace motivation is most necessary for retaining the workforces in a company. The performance quality of the workers determines the success of the company. Hence, it is essential for the company to provide the proper training sessions to the workers, which will beneficial for making them knowledgeable about using the innovative technologies. The development or training session is even helpful enough in upgrading the professional skills of the employees. Accordingly, it will bring much motivational working environment that can enhance the performance parameter of the associated employees. Decision Making One of the major aspects of increasing the organisational productivity is the relevant decision making process. The workplace needs to consider the efficient management system that can undertake the proper decision relevant for the innovative functionalities. It has been noted that the company has been structuring the organisational functionalities by undertaking the innovative procedures and technologies (Bohnsack, Pinkse and Kolk 2014). Hence, it is necessary for the companies to recognise the underlying issues and other necessary activities that may increase the organisational productivity. After recognising such underlying scenario, the management requires undertaking the relevant decision. Moreover, while bringing the innovative technologies for the future innovations, the structured and efficient decisions are needed to be made by the management. Conclusion The discussion presented in this study is initiating the idea that in this current world, each of the organisations has been giving their best effort to remain competitive. The company like Tesla motors is not an exception. In order to bring much innovation, the company has been changing the work nature. The study also identified the future innovations that can strengthen the organisational position in a competitive world References Bohnsack, R., Pinkse, J. and Kolk, A., 2014. Business models for sustainable technologies: Exploring business model evolution in the case of electric vehicles.Research Policy,43(2), pp.284-300. Chen, Y. and Perez, Y., 2015, June. Business model design: lessons learned from Tesla Motors. InGerpisa Conference, ENS Cachan, Paris(pp. 10-12). Goodrick, S., 2014. Man and machine.The Lancet Neurology,13(11), p.1080. Liu, Y.E., Kang, Y., Wu, H., Chen, C. and Hon, E., 2014. Tesla Motors Inc. Case Synopsis.Burnaby BC: Simon Fraser University. Retrieved,10(18), p.2014. Palin, R., Johnston, V., Johnson, S., D'Hooge, A., Duncan, B. and Gargoloff, J.I., 2012.The Aerodynamic Development of the Tesla Model S-Part 1: Overview(No. 2012-01-0177). SAE Technical Paper. Spencer, F., 2016. Wicked Opportunities: 7 Shifts In the Age of Opportunity. The Magazine of the Rotman School of Management, pp.1-14.

The Difference Between Search Engine Optimization and Search Engine Manipulation

Anyone with an online business understands the importance of search engine rankings and that the best way to boost your ranking is to use search engine optimization (SEO) tactics. While you’re probably familiar with the idea of SEO, you may be hearing more and more about another, more worrisome, concept: search engine manipulation. Unfortunately, these two terms are sometimes confused and can make some reluctant to use any tactics to boost their ranking because they don’t want to risk being penalized by Google. But there is no reason to abandon SEO for your website. So, let’s clear up any confusion and separate myth from the real story. Optimization vs. Manipulation Search engine optimization can be defined as â€Å"the legitimatemarketing practice of building web pages that get more visitor referrals from search engines.† This set of accepted, white-hat practices includes: Researching common keyword phrases used to search for your products or services Writing optimized content Improving a website’s technology so that it performs better for users Adhering to these best practices won’t just bring more traffic to your website, it will also improve the quality of that traffic. Good SEO helps people find what they’re looking for and that leads to more sales and a better reputation for your business. Search engine manipulation, on the other hand, is the darker side of SEO. It involves tactics that add nothing to the user experience and frequently make it worse. Manipulative tactics include: Keyword stuffing Creating huge numbers of poor-quality pages Building artificial link networks Creating misleading web pages that appear differently to search engines and users SEO best practices and black-hat manipulation techniques seem to be worlds apart, so what’s all the confusion about? In real life, the differences between these two sets of tactics aren’t always so clear-cut. Let’s take keywords as an example. Used in moderation, keywords can be a powerful way to optimize your content so that the right users find your website. However, keyword stuffing is nothing more than a manipulative technique that ends up turning people away. Where’s the line drawn between optimizing with keywords and stuffing them? The fear of a possible Google penalty also fuels the confusion. Black-hat SEO has existed since the advent of search engines, but the definition of â€Å"search engine manipulation† has become a hot topic more recently due to a lawsuit involving Google. The suit was filed by e-ventures Worldwide, a company which has had multiple sites banned by Google and is now seeking damages. One document in the lawsuit includes a declaration by Brandon Falls, a search-quality analyst for Google. Falls makes a couple of statements that leave ample room for interpretation: â€Å"An important part of providing valuable search results to users is Google’s protection of the integrity of its search results from those who seek to manipulate them for their own gain.† â€Å"Accordingly,Google considers search engine manipulation to be extremely serious and expends substantial resources to try to identify and eliminate it.† These statements have had the SEO community buzzing: What does Google mean by manipulation? Is Google saying that accepted SEO tactics can get you penalized or even banned? A thorough reading of Falls’ full testimony makes it pretty obvious that the term â€Å"search engine manipulation† refers to spammy tactics and doesn’t include traditional SEO best practices. Still, the fear-mongering continues. Google could have been a little clearer in the wording of their declaration, but as long as you’re sticking to SEO best practices, there’s really no cause for alarm. So, what’s the final verdict on white-hat optimization techniques vs. black-hat manipulation tactics? The biggest difference is intent. Optimization focuses on improving the user experience and delivering the most valuable search results. Manipulation relies on deception – misleading both search engines and users in order to achieve success. If you stick with accepted SEO best practices and Google’s own guidelines for your website and your content, you can rise to the top of the search results without any fear of repercussions.

Cherbourg

Cherbourg CherbourgCherbourg is a city that lies in the northwestern part of France. It is part of Normandy, a region and former province. Cherbourg sits along the English Channel, on the northern point of the Cotentin peninsula, in the ?Manch department? of France. It has been settled since ancient times. It now has a population of about 27to 29 thousand people.If you were to travel by car to Cherbourg it would be a long and weary journey. Cherboug is sometimes said to be ?the end of the world?. But then it opens up to a beautiful open harbor with many ships.A naval base is stationed at Cherbourg. It is also a seaport. Some of the industries of the town include: timber, coal, and shipbuilding. Submarines, oil tankers, electronics, and metals are also manufactured here.There was a battle over the control of the city between France and England.Plaque commà ©morative, centre culturel de Cherbour...